Sunday, May 24, 2020



Fabric pilling: 
when the fabric is used for garment, flat sheet, fitted sheet, car sheeting, table linen etc, it passes under various kind of situations like rubbing, stretching, lighting, raining etc. the rubbing of the fabric badl POPy affect the fabric surface. This rubbing situation generates balls on the fabric surface. Thus we can say that the balls formation on the fabric surface during fabric wear due to the entanglement of protruding fibres is termed as pilling. These balls on the fabric surface forms due to rubbing. The pilling of the fabric is always a major fabric quality issue because it directly affects the fabric surface.

Apparatus used:

1 - Martindale pilling tester

2 - processed fabric ( dyed or printed)

3- scissor

4 - Measuring scale

5 - marking pen

Specimen's preparation:

One pair of circular specimen of 38 mm diameter is cut from the fabric.

Another pair of circular specimen of 140 mm diameter from the fabric.

Mounting of specimens:

The specimen of 38 mm diameter is mounted on the machine as shown in below figure:

The another test specimen of 140 mm diameter is mounted as shown in below figure:

Working principle:

In this pilling testing machine, the face of the test specimen gets rubbed against the face of the same mounted fabric in the form of a geometric figure, that is , straight line, which becomes a gradually widening ellipse, until it forms another straight line in the opposite direction and traces the same figure again under light pressure for a specific number of movements.

Testing procedure: 

1 - After mounting of the specimens, the required number of turns are set in the electronic counter meter. 

2 - 100 turns are set into the counter meter.

3 - The main power supply is switched on.

4 - Finally the electric supply of the machine is switched on by pushing on button.

5 - The machine starts and gets stopped after reaching pre - set number of turns.

5 - Now, the the 38 mm specimen is taken out from the machine.

6 - Next, the specimen is compared with visual standard for evaluation of the degree of pilling.

7 -  The visual standard may be either actual fabric or photographs of the fabric showing a range of pilling resistance.

8 - The rating of the test specimen is given by using an arbitrary rating scale. ( 1 to 5)

You may also be interested in below articles:

You may be interested in below sponsored links:

No comments:

Post a Comment